No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


Huawei SAP HANA Appliance Two Node Installation Guide (RH5885H and RH8100 V3+Redhat) 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document


This document describes how to install a SAP HANA high availability (HA) cluster and configure SAP HANA System Replication for Redhat6.7/Redhat7.2 based on standalone SAP HANA appliances.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers
  • Users

Symbol Conventions

The symbols that may be found in this document are defined as follows.



Alerts you to a high risk hazard that could, if not avoided, result in serious injury or death.

Alerts you to a medium or low risk hazard that could, if not avoided, result in moderate or minor injury.

Alerts you to a potentially hazardous situation that could, if not avoided, result in equipment damage, data loss, performance deterioration, or unanticipated results.

Provides a tip that may help you solve a problem or save time.

Provides additional information to emphasize or supplement important points in the main text.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 05 (2018-09-25)

This issue is the fifth official release. Some graphics are revised.

Issue 04 (2018-08-10)

This issue is the fourth official release. Optimized some content.

Issue 03 (2018-07-13)

This issue is the third official release. Refresh some commands for configuring the NTP service.

Issue 02 (2018-05-15)

This issue is the second official release. Added the installation procedure of Redhat6.7.

Issue 01 (2016-09-21)

This issue is the first official release.

Updated: 2018-09-28

Document ID: EDOC1100019155

Views: 6324

Downloads: 62

Average rating:
This Document Applies to these Products
Related Documents
Previous Next