No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server Compute Node and Switch Module iBMC (V300 or Later) User Guide 06

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers. It includes the following:

  • Functions and features of the iBMC
  • iBMC web user interface (WebUI)
  • iBMC command line interface (CLI)
  • Commands used on the iBMC
NOTE:

This document describes only the commands used to deploy and maintain Huawei servers. It does not include the following commands:

  • Commands for server manufacturing, assembling, and factory inspection and repair.
  • Commands for engineering implementation or fault locating.

Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.

This document applies to:
  • V3 compute nodes: CH121 V3, CH121L V3, CH121H V3, CH140 V3, CH140L V3, CH220 V3, CH222 V3, CH225 V3, CH226 V3, and CH242 V3 DDR4
  • V5 compute nodes: CH121 V5, CH242 V5, CH121L V5, CH221 V5, and CH225 V5
  • Switch modules: CX220, CX320, CX318, CX620, CX621, CX710, CX820, CX920, CX916, and CX916L

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

The person who installs, manages, and troubleshoots servers must be qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue

Date

Description

06 2018-11-05
05 2018-08-08
04 2018-07-05

Updated Alarm Settings, and Remote Console.

03 2018-06-07
02 2018-05-30

Updated System, One-Click Information Collection and Restoring Default iBMC Settings.

01 2018-05-14

This issue is the first official release.

Translation
Download
Updated: 2018-11-20

Document ID: EDOC1100019357

Views: 31214

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next