No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Multiple Node Installation Guide (KunLun 9008 V5) 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes how to install and configure the SAP HANA cluster solution.

This document covers the SAP HANA cluster solution overview, installation plan, OS installation and configuration, network configuration, NTP service configuration, DNS service configuration, external storage configuration, and database installation.

Supported OSs are as follows:

  • SUSE Linux Enterprise Server (SLES) 12.2/12.3
  • Red Hat Enterprise Linux (RHEL) 7.3

Supported SAP HANA databases are as follows:

  • SAP HANA Database 1.0
  • SAP HANA Database 2.0

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers
  • Users

Symbol Conventions

The symbols that may be found in this guide are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

This symbol does not indicate personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 01 (2018-08-10)

This is the first official release.

Translation
Download
Updated: 2018-08-17

Document ID: EDOC1100035132

Views: 49

Downloads: 0

Average rating:
This Document Applies to these Products
Related Documents
Share
Previous Next