No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ- How check if NE40/80 enables OSPF protocol and how much the COST value of interface is

Publication Date:  2012-07-27 Views:  47 Downloads:  0
Issue Description

 Q: How check if NE40/80 enables OSPF protocol and how much the COST value of interface is?

   NE40/80 version isVRP3.10-0430

Alarm Information
None
Handling Process

A:
We can check via command "disp ospf interface" under the system view of NE40/80.
Such as:
Check the COST value of vlanif 104:

[NE40]disp ospf interface Vlanif 104
    Interface: 192.168.1.9 (Vlanif104)
      Cost: 1 State: DR    Type: Broadcast
      Priority: 1
      Designated Router: 192.168.1.9
      Backup Designated Router: 192.168.1.10
      Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
The COST value of vlanif 104 is: 1. 
Check the COST value of LoopBack 0:
[NE40]disp ospf interface LoopBack 0
    Interface: 192.168.1.11 (LoopBack0) --> 192.168.1.11 
      Cost: 1562 State: P To P    Type: PointToPoint
      Priority: 1
      Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1

The COST value of LoopBack 0: 1562.
Check the COST value of interface GE 7/0/1:
[NE40]disp ospf inter g7/0/1
    Interface: 192.168.1.21 (GigabitEthernet7/0/1)
      Cost: 1 State: DR    Type: Broadcast
      Priority: 1
      Designated Router: 192.168.1.21 
      Backup Designated Router: 192.168.1.22
      Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
The COST value of interface GE 7/0/1 is: 1.
  

Root Cause
None
Suggestions

None

 

END