No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-changing extend ID do not cause NEIP changing

Publication Date:  2012-07-24 Views:  51 Downloads:  0
Issue Description
There is a METRO 1000 on site,its extend ID is 9,base id is 8 and NEIP adress is 129.9.0.8.Now the user changes extend ID from 9 to 8.
after changing takes effect,login successfully using command line,but it prompt "login failure" to login  using T2000.
      
Alarm Information
login failure
Handling Process
1.using command line login equipment successfully,it indicates the equipment is runing normally
2.check out the parameter of creating now NE on T2000 and find out that extend ID is 8 ,base id is 8 and NEIP adress is 129.8.0.8 .tell user that changing extend ID do not cause NEIP chaning.
the user creates NE on T2000 again using IP 129.9.0.8,then login successfully
      
Root Cause
configuration      
Suggestions

none.

      

END