No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

if line board of OSN equipment has been configured synchronous resource,we can not delete the board

Publication Date:  2012-07-24 Views:  47 Downloads:  0
Issue Description
engineer wants  to delete the line board(8-SSN1S16) of NG-SDH,but the T2000 system report error,"can not delete boad,error code is 38667",we use command can not delete the board also:
:cfg-del-board:8
failed! cmd:0x8101 error:0x970b NSERR_CFG_CANT_DEL_BD    
Alarm Information
none
Handling Process
at first check if there is cross-connect,but there is no cross-connect configured:
:cfg-get-xc:8,0
failed! cmd:0x8602 error:0x9706 NSERR_CFG_GET_NULL                      
:cfg-get-xc:0,8
failed! cmd:0x8602 error:0x9706 NSERR_CFG_GET_NULL
then when we check the synchronous resource,we found the board has been configured :
:cfg-get-alls1:80
                                    ALL-SYN-S1                                    
                               SYN-SOURCE  S1-VALUE                               
                               0x0801      QL_DNU                                 
                               0xf101      QL_DNU    
0801 shows that port 1 of the 8th slot board(8-SSNSL16) is one of synchronous resources.
so we delete this configuration used T2000,we can delete the board successfully
Root Cause
maybe:
OSN equipment has cross-connect in line board
synchhronous resource cofigured in this board.

END