No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

In routers User not able to login to router through Telnet due to configration problem

Publication Date:  2012-07-27 Views:  52 Downloads:  0
Issue Description
User is not able to telnet to a router .
      
Alarm Information
Null
            
Handling Process
User when tried to telnet to a router is not able to telnet it , when analysis it was found that the command to configure the telnet given is 
user-interface vty 4 
when only vty 4 is configured then it doen't allow user to login the router . it allows to login on 5th window ( vty4) only one atleast 1 window out of vty0 to vty3 ) is configured .
      
Root Cause
User when tried to telnet to a router is not able to telnet it , when analysis it was found that the command to configure the telnet given is 
user-interface vty 4 
      
Suggestions
Null
      

END