No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

VPN Service cannot be Interconnected because NAT FE Port does not Support MPLS

Publication Date:  2012-07-27 Views:  35 Downloads:  0
Issue Description
Enable MPLS-VPN PE connected port at FE of NE40NAT board and opposite private network route can be learned, but it cannot ping through opposite private network interface. WHen PE connected port is changed on common service board, it is normal.
Alarm Information
Null
Handling Process
1. Check software version of the device (VRP3.10 RE 2229) and there is no such problem.
2. Data configuration is normal.
3. Check Operation Manual and confirm that port at NAT board can be used as NAT log host and cannot be used as service board.
Root Cause
1. Software version is problematic.
2. Data configuration is problematic.
3. NAT board does not support connected PE port.
Suggestions
1. Understand device performance.
2. Communicate with others and practise.

END