No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Problem with the Laser Module report LSR_NO_FITED

Publication Date:  2012-07-24 Views:  47 Downloads:  0
Issue Description
If the  laser module is presenting problems or it is not installed it reports LSR_NO_FITED.
                        
Alarm Information
LSR_NO_FITED parameters: 0x08 0x00 0x01 0xff 0xff.
      
Handling Process
Check the parameters:
PARA1=0x08;
It means the port eight is presenting this alarm. It can happen with processor boards and also with interface boards.
It is necessary to check if the module  is working or not installed or just have bad contact.
            
Root Cause

If the laser module is presenting problems or it is not installed it reports LSR_NO_FITED.
It also can be caused by the maintenance people, that is not enough carefull to disconnect a fiber from the module, pulling the fiber with excessive power. By this way you can have a bad contact.
                  

      
Suggestions

null

      

END