No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How do NE80 and NE40 VRP3.10-23XX Version Check EACL Match

Publication Date:  2012-07-27 Views:  32 Downloads:  0
Issue Description
Q:
NE80/40 version is VRP3.10-23XX.
Configure the following EACL:
   rule-map test icmp  source address 0  destination address 0
   eacl test test permit  
 apply it on the port
   [NE40-Ethernet6/0/0]access-group eacl test 
Alarm Information
Null
Handling Process
A:
1. Enter into diagnosis mode.
2. Check hardwaer EACL test match number with efu qos hit-count eacl test.
[NE40-diag]efu qos hit-count eacl test                                           
  Query EACL hit count from NPS:                                                
  test test: Ethernet6/0/0                                                      
  The number of EACL hits: 100      100 is EACL match number.
Root Cause
Under common mode there is no way to check EACL match number.
Suggestions
1. EACL can be flexibly used to check loss.
2. The command should be under common mode.

END