No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to Change Logfile Record Path of NE40E

Publication Date:  2012-07-27 Views:  54 Downloads:  0
Issue Description
Q:
NE40E has two CFcards placed in interior of MPU. CFcard is to store started file, configuration file, paf and license. CFcard(CFcard2) on MPU is to store log file. Under default, if MPU board does not plug CFcard, the device cannot record logfile. After the problem occurs, needed log may not be collected.
Alarm Information
Null
Handling Process
A:
When MPU only sets one CFcard, change logfile record path NE40E through hidden command. Record log in CF card of MPU interior.
1. Enter into hidden mode
[NE40E]_h
Now you enter a hidden command view for developer's testing, some commands may 
affect operation by wrong use, please carefully use it with HUAWEI engineer's 
direction.
[NE40E-hidecmd]
2. Change CFcard from logfile record path to MPU interior under hidden mode.
[NE40E-hidecmd]set logfile-path cfcard
Root Cause
Null
Suggestions
Null

END