NE80E and C corporation's router establish OSPF neighbor. The neighbor can only reach loading state.
<JZ_NE80E_1>disp ospf peer
OSPF Process 1 with Router ID 188.8.131.52
Area 0.0.0.0 interface 184.108.40.206(Pos4/0/0)'s neighbors
Router ID: 220.127.116.11 Address: 18.104.22.168 GR State: Normal
State: Loading Mode:Nbr is Slave Priority: 1
DR: None BDR: None MTU: 4470
Dead timer due in 37 sec
Neighbor is up for 00:00:00
Authentication Sequence: [ 0 ]
1. Check configuration of two ports and it is no problematic.
2. The problem occurs in the process of LSDB synchronization, check several abnormal LSA with display ospf request-queue command.
3. Turn off the router that creates abnormal LSA and OSPF neighbor reaches full state.
The reason is that NE80E receives abnormal LSA. When NE80E and C corporation's router establish OSPF neighbor, NE80E requests several LSA to C router. LSA that C rotuer sends to NE80 does not match the rule of RFC2328. NE80E refuses and continues to request these LSA. C router still sends these abnormal LSA. The neighbor cannot reach full state.
TOS of abnormal LSA=127, as follows; but the protocol rules TOS=0;
Type-5 AS External Link States
LS age: 984
Options: (No TOS-capability, DC)
LS Type: AS External Link
Link State ID: 22.214.171.124 (External Network Number )
Advertising Router: 126.96.36.199
LS Seq Number: 80005022
Network Mask: /28
Metric Type: 2 (Larger than any link state path)
Forward Address: 0.0.0.0
The protocol realization of different corporations is not the same. Analyze the handling of the problem from different factors.
It needs load the patch, please notice patch list in English website for detailed version.