No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MPLS Martini L2VPN–INTERWORKING-Remote Switch in different links–VRP 5.xx

Publication Date:  2012-07-27 Views:  42 Downloads:  1
Issue Description
VRP 5.xx
The intent of this contribution is to show the correct way of configure MPLS Martini L2VPN � INTERWORKING - Remote Switch in different links; show the configuration and a real example. (ATM to ETHERNET).
Alarm Information
Null
Handling Process
The key point here is the peers’ configuration. (In the interface we must to configure the remote CE IP address)
Configuration of the PE1
#
interface GigabitEthernet1/0/0
 ip address 172.18.31.6 255.255.255.252 
 mpls
 mpls ldp
#
interface GigabitEthernet1/1/0.299
 vlan-type dot1q vid 299
 ip address 172.18.31.246 255.255.255.252  // Remote CE (ATM CE)
 local-ce ip 172.18.31.245 // or  MAC address. Not booth of them.
 mpls l2vc 172.18.30.1 299 ip-interworking
#
Configuration of the PE2
#
interface GigabitEthernet2/0/0
 ip address 172.18.31.5 255.255.255.252 
 mpls
 mpls ldp
#
interface Atm4/0/0.3 p2p // The p2p parameter must be configure at the moment that create the interface, otherwise can not be create it
 pvc  0/35
  map ip 172.18.31.246
 #
 mpls l2vc 172.18.30.3 299 ip-interworking
#
ip address 172.18.31.245 255.255.255.252 // Remote CE (Ethernet CE) 
For further information and detail topology, please refers to the attachment.
Root Cause
Null
Suggestions
Null

END