No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to configurate ACL by time range

Publication Date:  2012-07-27 Views:  30 Downloads:  0
Issue Description
Q:
How to configurate ACL by time range?
Alarm Information
Null
Handling Process
A:
Configuration:
#                                                                               
 time-range test 17:50 to 18:00 daily   
#
acl number 3010                                                                 
rule 5 deny ip source 219.139.116.46 0 time-range test    
%the rule above will effect during the time-range %                    
rule 10 permit ip 

traffic classifier test-time operator or                                        
if-match acl 3010       

traffic behavior test-time 
#
traffic policy test-time                                                        
classifier test-time behavior test-time 
#
interface GigabitEthernet1/0/4.1371                                             
vlan-type dot1q 1371                                                           
ip address 219.139.116.45 255.255.255.252                                      
traffic-policy test-time inbound 
      
Root Cause
Null
Suggestions
Null

END