No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Batch file not working because syntax was wrong on AR28

Publication Date:  2012-07-27 Views:  17 Downloads:  0
Issue Description
Customer would like to use batch file to configure their AR28 routers. However, they could not change the ip address and etc by using batch file.
Alarm Information
After configured the batch file, it seems the configure it is not in use, which means it can be a batch file problem.
Handling Process
1,in the original file:
#^M
interface Ethernet 1/0^M
ip address 3.3.3.3 255.255.255.0^M
#^M
undo shutdown^M
#^M
change this to:
interface Serial0/0
link-protocol fr
fr interface-type dce
fr lmi type ansi
fr traffic-shaping
fr dlci 102
ip address 172.20.169.174 255.255.255.252
Root Cause
1, Batch file was broken
2, the version  the switch uses does not support batch config very well.
Suggestions
Use plain text as possible to avoid any mistakes in batch file.

END