No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Problem in NAT funciton due to missing command

Publication Date:  2012-07-27 Views:  31 Downloads:  0
Issue Description
Customer wants to configure NAT function in NE80 router using NAT card. We perform all the configurations using operation manual but there was one command missing in the manual due to which NAT does not work.
      
Alarm Information
Null
            
Handling Process
After adding the command and modifying the configuration, the NAT configurations were successful and the problem is resolved.
[NE80]nat address-group 1 202.74.232.33 202.74.232.38 mask 255.255.255.248 slot 9 no-pat
[NE80]nat enable address-group 1
[NE80] rule-map intervlan natrule ip 192.168.167.0 0.0.0.255 any
[NE80]flow-action nataction nat address-group 1 service-class 2
[NE80]eacl natacl natrule nataction
interface Ethernet1/0/12
 description "For NAT, Connected to NOC HUB"
 negotiation auto
 undo shutdown
 ip address 192.168.167.1 255.255.255.0
 access-group router eacl natacl
      
Root Cause
The configuration was unsuccessful because of a missing commnad 
[NE80]nat enable address-group 1
      
Suggestions

Null

      

END