No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How can Users with Only Level 1 Right Add a Static Route

Publication Date:  2012-07-27 Views:  42 Downloads:  0
Issue Description
Q:
On the NE40, how can the users with only level 1 right add static routes?
      
Alarm Information
Null
Handling Process
A:
Take VRP5.30 as an example to describe how to add the right of configuring a static route for users with only level 1 right.
[Quidway]command-privilege level 1 view shell system-view //Users with level1 right enter the system view.
[Quidway]command-privilege level 1 view system ip route-static
[Quidway]command-privilege level 1 view system ip route-static 1.1.1.1 //Users with level1 right can configure a static route in the system view.
Pay attention to the following points when you configure the preceding commands:
1. If users who are configured with only command-privilege level 1 view system ip route-static 1.1.1.1 level right cannot configure a static route, another command-privilege level 1 view system ip route-static command need to be added.
2. When you configured the command-privilege level 1 view system ip route-static 1.1.1.1 command, the address of the destination network segment is 1.1.1.1 without mask.
      
Root Cause
Null
      
Suggestions
Null

END