No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Is VPLS support E1 connection between PE-CE

Publication Date:  2012-07-27 Views:  2 Downloads:  0
Issue Description
Q:
NE40 is a PE in a L3 IP/MPLS domain. If the PE-CE interface is E1. Is it possible to configure L2MPLS (i.e. VPLS) on the PE?
      
Alarm Information
null
Handling Process
A:
Just VRP Version 5.10 or later of NE40NE80 support this function by this configuration:
Configure remote session of LDP.
# Configure PE1.
[PE1] mpls l2vpn
[PE1] mpls ldp remote-peer name
[PE1-mpls-ldp-remote-pe2] remote-ip x.x.x.x
[PE1-mpls-ldp-remote-pe2] quit
[PE1] vsi v static
[PE1-vsi-v] pwsignal ldp
[PE1-vsi-v-ldp] vsi-id 2
[PE1-vsi-v-ldp] peer x.x.x.x
PE1] interface serial1/0/0:15
[PE1-serial1/0/0.15] vlan-type dot1q vid 10 20
[PE1-serial1/0/0.15] l2 binding vsi v
Configure the CE1
#
interface Serial1/0/0
 fe1 timeslot-list 1-31
 vlan-type dot1q vid 10
 ip address y.y.y.y 
Root Cause
null
Suggestions
null

END