No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Can NG-WDM Electrical Layer or Optical Layer grooming Services Trail is created in T2000

Publication Date:  2012-07-24 Views:  55 Downloads:  4
Issue Description
Configuration of electrical Layer or Optical Layer grooming services Trail was not created in T2000.
 
Alarm Information
None
Handling Process
To confirm the services was configured normally or not b/w two Sites
Site-A-103-L4G........................Site-B-103-L4G 
Select the T2000V2R5 option- Communication ----DCC Management and Query the following parameter.
103-L4G-1(IN/OUT111) -----GCC0----------------Normal
103-L4G-1(IN/OUT111) -----GCC12_18----------Normal
Check the above mention parameter on both site and found the above result, it describe us that the services were configured correct (through) b/w two sites.
Attached Snap shot  for you reference.
Root Cause
How you will confirm whether the service is configured  b/w Two sites is correct or not.
Trail of services was not supported by NG-WDM V1R2 version and T2000V2R5 or T2000V2R6 version.
Suggestions
Using DCC management confirm the correctness of Electrical layer or Optical Layer grooming services.
      

END