No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to modify the IP address of dual system(watchman version is V2R7)

Publication Date:  2012-07-24 Views:  49 Downloads:  0
Issue Description
Q:
The former cases about modifying the dual system IP address are fit for the watchman which version is below V2R7. The configure files of watchman V2R7 is different from the former watchman.So the method of modifying the dual system IP address is different.
Alarm Information
Null
Handling Process
A:
1./etc/hosts
2./etc/netmasks
3./etc/hostname.ce0
4./etc/hostname.ce1
5./etc/rc3.d/Srouter --modify the part of "route add"
6.modify the DataBase:
  #dsedit
 If the Host name is localhost or 127.0.0.1, it's no need to modify. 
7./opt/watchman/server/conf/watchman.xml
  There are three parts to be corrected:
  <param name="local_ip">10.66.0.201</param>
        <param name="local_netmask">255.255.240.0</param>
        <param name="remote_hbname">CSHB1</param>
        <param name="remote_ip">10.66.0.202</param>
        <param name="remote_netmask">255.255.240.0</param>
        <param name="remote_port">9202</param>
.......
<floatipes name="floatipes">
          <floatip name="floatIP">
            <param name="caname">PONTIANAK_A</param>
            <param name="netcard">ce1</param>
            <param name="ipaddr">10.66.0.205</param>
            <param name="netmask">255.255.240.0</param>
8./opt/watchman/client/bin/conf/ClusterIP.conf
After modify these cofigure files, please restart the watchman to make sure the float ip address enable.
Root Cause
Null
Suggestions
Null

END