No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Cause for the List Extend Command Elements , Will Be Sent Prompt after a Command Is Used on the NE40

Publication Date:  2012-07-27 Views:  47 Downloads:  0
Issue Description

[XF_NE40]disp interface Ethernet 8/0/0
List extend command elements , will be send.---The prompt is as follows:
No exist any extend command elements.
List command elements , will be send.
Para-type: WORD Para-OID: 0x500101 Para-Value: interface
Para-type: WORD Para-OID: 0x500102 Para-Value: Ethernet
Para-type: WORD Para-OID: 0x500103 Para-Value: 8/0/0
<XF_NE40>sys
List extend command elements , will be send.
No exist any extend command elements.
List command elements , will be send.
Para-type: Integer Para-OID: 0x1500101 Para-Value: 0x4
[XF_NE40] disp ver
List extend command elements , will be send.
Para-type: Integer Para-OID: 0xfcf08902 Para-Value: 0x1
List command elements , will be send.
<XF_NE40>cd hd:
List extend command elements , will be send.
Para-type: Integer Para-OID: 0x120101 Para-Value: 0x1
List command elements , will be send.
Para-type: WORD Para-OID: 0x120107 Para-Value: hd:
<XF_NE40>pwd
List extend command elements , will be send.
Para-type: Integer Para-OID: 0x120106 Para-Value: 0x1
List command elements , will be send. 

 
Alarm Information
 Null 
Handling Process

In hidden mode, run the undo _debugging cmdline config-message command. 
 
Root Cause
 The _debugging cmdline config-message command is used. 
Suggestions
 Do not run similar debugging commands. 

END