No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Failed to View and Config MA5100 from EMS because of unwanted trap messages

Publication Date:  2012-07-25 Views:  50 Downloads:  0
Issue Description
Version:
BMS iManager N2000 V200R008B02D061SP27J03
MA5100 V200R008B02D061
Ma5605 V200R008B02D061
Phenomenon:
We have 2 DSLAM server, one is for V1R007 and the other is V1R008...both server have MA5100 and the problem is located at the V1R008 server...that server have MA5605 and MA5100, MA5605 is ok but MA5100 is not ok...we can't view and config it from EMS.
Alarm Information
Null.
Handling Process
Implement those command below on server:
#isql -Usa -PXXXX -SN2000DBServer ---XXX is the password
1>use FaultDB
2>go
1>delete from tbl_RegInfo where ProcID=72 and RecvModule=105
2>go
1>delete from tbl_RegTrap where ProcID=72 and ModuleID=105 and TrapID in (4,5,21,1610612759) and Condition = 4
2>go
And then restart Ma5100V2R1Dm and EmfFaultDm, after that the problem has been solved. 
Root Cause
Catch log for analysis, we found that so many trap messages like "adsl port active /deactive " from N2000 server log and MA5100 log, that should impact on the performance of the BMS.
Need to mask some trap messages.
Suggestions
Null.

END