No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to Remove the SNMP Probe Alarm of the ME60

Publication Date:  2012-07-27 Views:  58 Downloads:  0
Issue Description
Q:
After an ME60 is cut over to the new network, an alarm frequently occurs on the ME60, indicating "the %%01SNMP/4/SNMP_FAIL(l): Login through SNMP failed(ip=X.X.X.X times=2)." This alarm affects the logs of the ME60 and the normal monitoring and inspection functions. How to remove this alarm? 
 
Alarm Information
Null 
Handling Process
A:
Run the info-center source SNMP channel 4 log state off command in the global configuration mode of the ME60 to disable the external SNMP query packets. This command neither affects the services nor affects the printing of the other logs. In this command, info-center source is used to add records to the information channel, SNMP indicates the module name, channel 4 indicates the errors that deserve attention but are not critical, log indicates the log information, and off indicates disable.
You can run the info-center source SNMP channel 4 log state off command to disable the external SNMP query packets. You should, however, specify the correct channel level to avoid shielding important logs. 
 
Root Cause
Null 
Suggestions
Null 

END