No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Why NT1 can not show activated status when the network has no traffic in UA5000 ISDN service

Publication Date:  2012-07-25 Views:  34 Downloads:  0
Issue Description
Q:
Why NT1 can not show activated status when the network has no traffic in UA5000 ISDN service?
Remark: UA5000 version for this narrowband service  is PVU8(V100R011B02D055)
Alarm Information
Null
Handling Process
A:
Cause in the packet mode, UA is using the "battery saving mode" as default, and can not config or modify. In the battery saving mode, when the network is idle, no traffic, the NT1 status will be deactivated.
If in the V5 mode, the configuration is on the Switch, UA can do noting with NT1 activated.
Root Cause
Null
Suggestions
Null

END