No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

DIP Switch Needs to Be Set for Replacement of the NE80 Power Monitor Board

Publication Date:  2012-07-27 Views:  38 Downloads:  0
Issue Description
After the NE80 is upgraded, the power monitor board (generally 24 slots) cannot be registered or is displayed as Abnormal after it is registered. 
Alarm Information
When the power monitor board cannot be registered, the "run" indicator on the board flashes rapidly in green. When the monitor board is displayed as Abnormal after it is registered, the alarm of the board flashes in red and the alarm of the MPU also flashes. In addition, the buzzer gives the sound alarm. 
Handling Process
Try plugging in and pulling out the board repeatedly. After that, if the board is displayed as Abnormal after it is registered, replace the board. If the board cannot be registered, check the DIP, which is in the alarm panel of the monitor board. The normal case is that the DIP switches of No. 2, 3, 5, 6, 7, and 8 are in the On state and others in the Off state. 
Root Cause
Null
Suggestions
Null

END