No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-What Does flow control receive Configured Under the Ethernet Interface Mean

Publication Date:  2012-07-27 Views:  33 Downloads:  0
Issue Description
Q:
What does flow control receive configured under the Ethernet interface mean? 
 
Alarm Information
Null
Handling Process
 A:
The flow control receive command configured under the Ethernet interface means that the interface only receives stop bits and cannot send stop bits. For flow control, by default, stop bits can be sent and received from an interface. When the flow control receive command is configured, the attributes of the interface are displayed as follows:
[TJ-TJ-QJD-D-1.MAN]dis int gi 7/0/9
GigabitEthernet7/0/9 current state : UP
Line protocol current state : UP
Description : To ZhongDianFeiHua 450M, Route Port
The Maximum Transmit Unit is 1500 bytes
Internet Address is 221.239.18.53/30
IP Sending Frames’ Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc85-8794
The Vendor PN is TRP-G1L1BCHWS
Port BW: 1G, Transceiver max BW: 1G, Transceiver Mode: SingleMode
WaveLength: 1310nm, Transmission Distance: 10km
Loopback:none, full-duplex mode, negotiation: disable, Pause Flowcontrol:Receive Enable // The interface can only receive stop bits.
The attributes of the interface on which the flow control receive is not configured are displayed as follows:
[TJ-TJ-QJD-D-1.MAN]dis int gi 2/0/0
GigabitEthernet2/0/0 current state : UP
Line protocol current state : UP
Description : To TJ-TJ-DS-S-1.MAN GE1/2/1 1G, Route Port
The Maximum Transmit Unit is 1500 bytes
Internet Address is 221.239.47.189/30
IP Sending Frames’ Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc85-8189
The Vendor PN is FTRJ1721P1BCL
Port BW: 1G, Transceiver max BW: 2.5G, Transceiver Mode: SingleMode
WaveLength: 1310nm, Transmission Distance: 45km
Loopback:none, full-duplex mode, negotiation: disable, Pause Flowcontrol:Send and Receive Enable // The interface can receive and send stop bits by default. 
 
Root Cause
Null
Suggestions
Null

END