No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Does the NE80E Support the Access of Two Log Servers

Publication Date:  2012-07-27 Views:  37 Downloads:  0
Issue Description
Q:
Does the NE80E support the access of two log servers? 
 
Alarm Information
Null
Handling Process

 A:
Yes.
Specific configurations are as follows:
Step 1 # Log in to the system to start SNMP Agent with the version of SNMP v3.
<Quidway> system-view
[Quidway] snmp-agent sys-info version v3
# Set the community name and access rights.
[Quidway] snmp-agent community read public
[Quidway] snmp-agent community write private
Step 2 Configure the access rights of the user.
# Configure user group information.
[Quidway] snmp-agent group v3 test1 read-view a write-view a notify-view a
[Quidway] snmp-agent group v3 test2 read-view b write-view b notify-view b
# Configure user information.
[Quidway] snmp-agent usm-user v3 NMS1 test1 authentication-mode md5 123 privacy-mode des56 456
[Quidway] snmp-agent usm-user v3 NMS2 test2 authentication-mode md5 123 privacy-mode des56 456
# Configure the MIB view function.
[Quidway] snmp-agent mib-view include b interfaces
Step 3 Configure the Trap function.
[Quidway] snmp-agent trap enable
[Quidway] snmp-agent target-host trap address udp-domain 1.1.1.1 params securityname NMS1 v3
[Quidway] snmp-agent target-host trap address udp-domain 1.1.1.2 params securityname NMS2 v3 
 

The NE80E supports the access of a maximum of six log servers. 

Root Cause
Null
Suggestions
Null

END