No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How Does the MA60 Performs Mirroring on Interfaces Based on Filtering Conditions

Publication Date:  2012-07-27 Views:  37 Downloads:  0
Issue Description
Q:
How does the MA60 (V100R005) perform mirroring on interfaces based on filtering conditions? 
 
Alarm Information
Null
Handling Process
A:
[MSCG]observe-port 1 interface GigabitEthernet4/0/8 ----GE 4/0/8 is regarded as an observing interface.
[MSCG]observe-filter 0 local dst-ip 61.132.146.14 255.255.255.255 ---Addresses are filtered.
[MSCG]interface GigabitEthernet4/0/0
[MSCG-GigabitEthernet4/0/0]port-mirroring to observe-port 1 inbound
[MSCG-GigabitEthernet4/0/0]port-mirroring to observe-port 1 outbound ----Mirroring port.

To perform mirroring on the outgoing packets on the interface, the observing interface and the interface configured with the mirroring function must be in the same slot.
When the traffic on an interface is heavy, it is not recommended to implement mirroring on the interface. 
 
Root Cause
Null
Suggestions
Null

END