No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Whether present implemented system support 10GE LAN PHY and 10GE WAN PHY or not

Publication Date:  2012-07-25 Views:  43 Downloads:  0
Issue Description
Whether present implemented system support 10GE LAN PHY and 10GE WAN PHY   or not
2. The cards/hardware   required   are same or different than which are presently used for 10 G SDH
3. Whether system is capable for handling of small frame sizes at full data rate.( Please provide data sheet if tested )
Alarm Information
Handling Process
Board  TN11LSX   
Type/Rate of Signals on Client Side
STM-64, OC-192, 10GE LAN, 10GE WAN, OTU2
Root Cause
I am not sure about the third one that the system is capable for handling of small frame sizes at full data rate or not.
In the current existing network we are using LSX Board .
For this Board might be need to change the SFP accordingly to the type of the Signals feed at client side. 
This is for your information.
Board                        
TN11LSX  
                                         
 Function
Wavelength conversion
 The Maximum Number of Client Signals
 1
 Type/Rate of Signals on Client Side
STM-64, OC-192, 10GE LAN, 10GE WAN, OTU2
 Type of Signals on WDM Side
OTU2
 Regenerator Board
 LSXR
 WDM Specification
DWDM
Suggestions

END