No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to Perform Inter-Board Mirroring on the Upstream Board on the MA5680T

Publication Date:  2012-07-25 Views:  64 Downloads:  0
Issue Description
Q:
How to perform inter-board mirroring on the upstream board on the MA5680T? 
 
Alarm Information
Null
Handling Process
A:
You can use the stream mirror mode. For example, mirror the traffic of port 0/19/0 to 0/20/0:
MA5680T(config-acl-link-4000)#rule 5 permit destination
{ mac_addr<P><XXXX-XXXX-XXXX> }:0000-0000-0000
{ mac_addr<P><XXXX-XXXX-XXXX> }:ffff-ffff-ffff
{ <cr>|type<K>|cos<K>|source<K>|time-range<K> }:
/////Create a link layer rule that is applicable to all packets.//////
MA5680T(config-acl-link-4000)#quit
MA5680T(config)#traffic-mirror
{ inbound<K>|outbound<K> }:outbound
{ user-group<K>|ip-group<K>|link-group<K> }:link-group
{ integer<U><4000,4999> }:4000
{ ip-group<K>|port<K>|rule<K> }:rule 5
{ ip-group<K>|port<K> }:port 0/19/0
{ <cr>|to<K> }:to
{ port<K> }:port 0/20/0
/////////Mirror packets sent from upstream port 0/19/0.///////
MA5680T(config)#traffic-mirror inbound link-group 4000 rule 5 port 0/19/0 to port 0/20/0
//////////Mirror packets sent to upstream port 0/19/0.//////// 
 
Root Cause
Null
Suggestions
Null

END