No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to Implement the Interworking Between Different FE Ports on the MA562xE

Publication Date:  2012-07-25 Views:  51 Downloads:  0
Issue Description
Q:
Different FE ports on the MA562xE are separated by default. How to implement the interworking between different FE ports in one VLAN at layer 2? 

 
Alarm Information
Null
Handling Process
A:
Run the undo isolate port command to implement the interworking. For example, run the following commands to cancel the separation between ports 0/1/1 and 0/1/2 so that ports 0/1/1 and 0/1/2 can communicate with each other:
MA5626(config)#undo isolate port 0/1/1
MA5626(config)#undo isolate port 0/1/2 

 
Root Cause
Null
Suggestions
Null

END