No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Why couldn't configure another administrative group under Physical Interface when using MPLS TE

Publication Date:  2012-07-27 Views:  31 Downloads:  0
Issue Description
Q:
We already have configured the interface with administrative group 4 So Why we couldn’t add another administrative group by value 2.
interface Pos12/0/0
mpls
 mpls te
 mpls te link administrative group 4
Alarm Information
Null.
Handling Process
A:
We can change administrative group value to include the two values 2 (0000 0010) and 4 (0000 0100) to be 6 (0000 0110) so that link contain the two colors and by changing affinity property and mask values under MPLS TE Tunnel when we are trying to match the administrative group values for interfaces we can check the three values 2, 4, 6 separated.
interface Pos12/0/0
mpls
 mpls te
 mpls te link administrative group 6
Tunnel interface configuration example:
interface Tunnel1/0/0                                                           
 ip address unnumbered interface LoopBack0                                      
 tunnel-protocol mpls te                                                        
 destination x.x.x.x                                                          
 mpls te affinity property 2 mask 2 (OR mpls te affinity property 4 mask 4, mpls te affinity property 6 mask 6)
And this link will match all these values.   
Root Cause
Null
Suggestions
Null

END