No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-What Are the Common Diagnosis Commands for the NetStream Feature

Publication Date:  2012-07-27 Views:  62 Downloads:  0
Issue Description
 Q:
What are the common diagnosis commands for the NetStream feature? 

 
Alarm Information
 Null 

 
Handling Process
 A:
1. display ip netstream export (Displays information about the exported Netstream traffic.)
2. display ip netstream export template (Displays the exported information about the NetStream template.)
3. reset ip netstream statistic (Clears statistics information about the Netstream traffic on a specific board.)
4. display efu pct slotid cardid portid (Displays the statistics of the incoming traffic on the Rainier board.)
5. display efu pct slotid cardid portid (Displays the statistics of the outgoing traffic on the Rainier board.)
The following commands are allowed only on the LPUB:
1. display pe-p slotid pct portid (Displays whether the NetStream feature is enabled.)
2. display pe-regsiter slotid ind 0 3 1 7e00 10 (Displays the sampling mode and sampling ratio.)
3. display pe-probe slotid spi (Displays the number of packets input and output through four interfaces on the SD588, and the status of the SPI interface.)
4. display pe-probe slot sd588-status (Displays the statistics on each type of packet input to and output from the SD588.)
The following command can display the configuration information delivered to the Netstream board:
1. display netstream efu ns-counter (Displays information about the counter of the NetStream board in diagnosis mode.)
2. display netstream efu cache aggregate-mode (used in diagnosis mode)
3. display netstream efu configuration (used in diagnosis mode) 

 
Root Cause
 Null 

 
Suggestions
 
Null
 
 

END