No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Can we change the electrical interface module by an optical interface module in the N2EGT2

Publication Date:  2012-07-25 Views:  60 Downloads:  0
Issue Description
In the V1R9 version, we deployed a new N2EGT2 board, which support the electric GE of NGSDH. This board supports the SFP electrical and SFP optical GE 
interface,And many customers have the following doubt: 
Can we change the electrical interface module by an optical interface module in the N2EGT2? Or from electrical to optical?
Alarm Information
None
Handling Process

1, The customer changed the electrical GE port by an optical GE port, the ethernet service did not work.
2. After checking with the R&D, we can exchange the two kind GE ports. But after the hardware change, we should run the following command to modify the parameter
 of the port, and then the service will be OK.
:cfg-replace-port:slot-ID,port-ID,sdh-eport/sdh-opport,ge
 
for the para3, sdh-eport means the electrical interface module ;sdh-opport means the optical interface module ;

Root Cause
None
Suggestions
None

END