No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Precautions for Configuring DHCP Relay

Publication Date:  2012-07-27 Views:  53 Downloads:  0
Issue Description
 Q:
What are the precautions for configuring DHCP relay? 

 
Alarm Information
 None 

 
Handling Process
 A:
In the system view, you do not need to use the dhcp enable command. You need to configure a DHCP server group first, and then set DHCP server addresses in the DHCP server group view. Enter the VLAN virtual interface view, set the IP address of the DHCP server group, set the DHCP server group to work in DHCP relay mode, and select the specified DHCP server group.
Note: The virtual interface of VLAN 1 does not support the DHCP relay function; therefore, no commands are available in configuration. Other VLAN virtual interfaces support the DHCP relay function.

[S9303-Vlanif1]d?
damping description diffserv-mode display
[S9303-vlan200]int vlan 200
[S9303-Vlanif200]d?
damping description dhcp diffserv-mode display
[S9303-Vlanif200]dhcp ?
relay DHCP relay
select Setting process mode of DHCP packet 

 
Root Cause
 None 

 
Suggestions
 None 

 

END