No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ - Why when access-limit configured under bas interface more user still can access ME60

Publication Date:  2012-07-27 Views:  39 Downloads:  0
Issue Description
Q: Why Country R ME60 configured access-limit 20 under bas interface, when user number more than 20, still can access?
interface GigabitEthernet5/0/0.1270
pppoe-server bind Virtual-Template 1
mtu 9216
description HSI-ATS-958
user-vlan 1 4094 QinQ 1270
bas
 access-type layer2-subscriber  default-domain  authentication pppoe
 client-option82
 access-limit 20 
Alarm Information
Null
Handling Process
A: access limit(bas mode) is used for each vlan. from the configuration we can see there are qinq configuration under the interface, the vlan number in total is 4094. so after configured access limit 20 under this bas interface, each vlan can access 20 user but not the whole interface.
Root Cause
Null
Suggestions
Please be noted: access limit can not be configured until access-type layer2-subscriber has been configured under bas interface first.

END