No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ONT can't be deleted caused by the static arp configuration

Publication Date:  2012-07-25 Views:  35 Downloads:  0
Issue Description
The ONT can't be delete even there are no service-port, and gemport:
MA5600T(config-if-gpon-0/7)#ont delete 1 24 
  Failure: The ONT cannot be deleted because there is configuration data on the ONT 
MA5600T(config-if-gpon-0/7)#display ont info 1 24 
  --------------------------------------------------------------------- 
  F/S/P                : 0/7/1 
  ONT-ID               : 24 
  T-CONT-ID     DBA-profile     Alloc-ID 
  ---------------------------------------------- 
          0               1           24 
  ---------------------------------------------- 
 
Alarm Information
Null
Handling Process
Null
Root Cause
There are static arp configuration on this ONT:
MA5600T(config)#display arp all                                    
{ <cr>|mpls<K>||<K> }:                                                          
                                                                                
  Command:                                                                      
          display arp all                                                       
IP Address      MAC Address    VLAN ID Port    ONT Type                         
192.168.100.1   781d-ba76-cab3 3006    0/7 /1  24  Static                       
That's why the ONT can't be deleted. people omit to check this configuration always.
Suggestions
The static arp releate to the services, not releated to ONT, the software should check this configuration before deleteing service-port.

END