No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to get the trace from SBC

Publication Date:  2012-08-09 Views:  47 Downloads:  0
Issue Description
Q:
SBC version: SE2300V200R007
When we debug the SBC, Alaways we need get the trace from SE2300 to find the message route normal or abnormal. But how to get the trace on SBC?
Alarm Information
None.
Handling Process
A:
1,Use serial cable connect laptop to SBC.
2, Get the SBC configuration.
HRP_M<SE2300-1-ZY>display cur
3, Enable debug switch
HRP_M<SE2300-1-ZY>deb sbc sip all all 
HRP_M<SE2300-1-ZY>terminal debug
Info:Current terminal debugging is on
HRP_M<SE2300-1-ZY>terminal monitor
Info:Current terminal monitor is on
HRP_M<SE2300-1-ZY>  
Let terminal location update, got the trace in SBC
4, Disable debug switch after finish
HRP_M<SE2300-1-ZY>undo terminal debug
HRP_M<SE2300-1-ZY>undo terminal monitor
HRP_M<SE2300-1-ZY>.
Root Cause
None.
Suggestions
None

END