No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to block the events GPON Message_Error Message on MA5652G

Publication Date:  2012-07-25 Views:  58 Downloads:  0
Issue Description

A lot of the following events print out on MA5652G:

! RUNNING MAJOR 2000-01-06 06:32:23 EVENT NAME :GPON Message_Error Message

PARAMETERS :FrameID:0, SlotID:0, PortID:0

 


Alarm Information


MA5652(config)#

! RUNNING MAJOR 2000-01-06 06:32:23 EVENT NAME :GPON Message_Error Message

PARAMETERS :FrameID:0, SlotID:0, PortID:0

 


Handling Process


In the new version of OLT(V800R007 and higher version), it has supportted a new function that deliver the time information to ONU via PLOAM message periodically , unfortunately the MA5652G don't  support this PLOAM message in current version, so the system will report this event nonstop.
The solution to fix this problem is to stop the OLT sending the PLOAM message, here is the procedure:
telnet to OLT,  input the commands follow the example below
MA5600T(config)#
MA5600T(config)#diagnose
MA5600T(diagnose)%%su
Challenge:3BALJJ9X
Please input password:
MA5600T(su)%%transparent on 0/1
Serial redirect function is enabled now!
MA5600T(su)%%
MA5600T(su)%%oltcfg clocksynswitch
{ OltId:<0..7>[0] }:
MA5600T(su)%%4
{ clockSynSwitch(1-On 2-Off):<1..2>[1] }:
MA5600T(su)%%2
MA5600T(su)%%
MA5600T(su)%%transparent off
Serial redirect function is disabled now!
MA5600T(su)%%config




Root Cause

Null

Suggestions


Null

END