No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to modify the mac addresses of PVM and IPM in UA5000V100R017 version

Publication Date:  2012-07-25 Views:  45 Downloads:  0
Issue Description

Q:

How to modify the mac addresses of PVM and IPM in UA5000V100R017 version?
 

Alarm Information
Null
Handling Process
A:
For IPM V100R017 version, we can modify the MAC addresses of IPM using following command:
MRSTRDAK_IPMB(diagnose)%%sysman mac-address                                    
{ current<K>|default<K>|recover<K> }:current                                   
{ mac-value<P><XXXX-XXXX-XXXX> }:0000-1111-2222
After modification, we need to reboot system to make modification take effect. And this command will modify both active IPM and standby IPM, active and standby IPM are using the same MAC.
For PVM V100R017 version, we can modify the MAC addresses of PVM using following commands:
SGBAGHW02(diagnose)%%mac modify 286E-D4F6-C8AA
{ option<E><active,standby> }:active
SGBAGHW02(diagnose)%%mac modify 286E-D4F6-C8AC
{ option<E><active,standby> }:standby
After modification, we need to reboot system to make modification take effect. And active and standby PVM are using different MAC addresses, so modification commands of active and standby PVM are seperate.

Root Cause
Null
Suggestions
Null

END