No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Cannot use qos-profile command on Q-in-Q interface

Publication Date:  2012-07-27 Views:  33 Downloads:  0
Issue Description
For traffic limiting, we use qos profiles on the  interface. we use v300r006c01spc003 and the version is not support qos-profile command on q-in-q interface.

Alarm Information
After entering the command , the router gives us that warning,
 
[router-gigabitethernet1/0/8.869]display this
#
interface gigabitethernet1/0/8.869
 control-vid 869 qinq-termination
 vlan-group 1
  statistic enable
  #
 qinq termination pe-vid 6 ce-vid 869 vlan-group 1
 mpls l2vc 212.156.116.252 63592 raw
#
return
 [router-gigabitethernet1/0/8.869]qos-profile 10400-ingress inbound
error: the command cannot be configured on this interface.
[router-gigabitethernet1/0/8.869]
 

Handling Process
For traffic limitation with that version, on q-in-q interface, “bandwidth value” can be used.

[router-gigabitethernet1/0/8.869]display this
#
interface gigabitethernet1/0/8.869
 control-vid 869 qinq-termination
 vlan-group 1
  statistic enable
  #
 qinq termination pe-vid 6 ce-vid 869 vlan-group 1
 mpls l2vc 212.156.116.252 63592 raw
#
return
 [router-gigabitethernet1/0/8.869]bandwidth 5600
[router-gigabitethernet1/0/8.869]

Root Cause
v300r006c01spc003 is not support qos-profile command on q-in-q interface for traffic limitation. For traffic limitation with that version, on q-in-q interface, “bandwidth value” can be used.
 
Suggestions
For that problem, you can upgrade the version v6r1spce00, v6r2,v6r3 or later versions. But, if you don’t want to upgrade, you can use “bandwidth value” command for q-in-q interfaces.

END