No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MPLS unicast tunnels can't be query throught NE explorer due to configuraion cause

Publication Date:  2012-07-25 Views:  42 Downloads:  0
Issue Description
Mpls unicast tunnels can't be query throught ne explorer (error: command not support, screen 1) from NMS. 
Also NMS U2000 can't reiceve data about MPLS tunnels from NE and display tunnel as disctrete.
Alarm Information
No any alarms or abnormal events on NE or NMS
Handling Process
Open NE explorer > MPLS management > Unicast tunnel management > query.
If error is ocures that means that problem is exist
Or from Navigator imput command: :mpls-tnl-get-lspmode:0; If command not implemented (error: NSERR_CFG_CMD_NOT_SUPPORT) - problem is exist.
Root Cause
Ne work normally, services on tunnels are working. Problem in management between NE and NMS from NE side.
Suggestions
Need to create tunnel on NE manually from navigator.
You can use command:
:mpls-tnl-add-statictnl:100,egress,uni,1.1.1.1,IP_address,200,x,255,y,33,0,0,0,0,0.0.0.0,0,0,0.0.0.0
description:
IP_address – lsr id of NE where tunnel creating
x – board ID
y – port ID
100 - tunnel ID
200 - label ID
all other data may be unchanged

After please imput two commands to check query MPLS tunnels:

:mpls-tnl-get-statictnl:0
:mpls-tnl-get-lspmode:0

END