No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

router down when in loop on WDM side of TN12LOG due to the wrong configuration of working mode .

Publication Date:  2012-07-25 Views:  34 Downloads:  3
Issue Description
Router down when in loop on wdm side of TN12LOG board.
router up when out loop on client port .
product type: osn6800 (5.51.06.14).

please refer to the attachment.



Alarm Information
null
Handling Process
1,we check the mode, then found it is different , problem fixed after set the right mode of board.
Root Cause
1,it is a bug.
2,the working mode of boards is different from the router.
Suggestions

1. what is the mode of router? 1000mfull or auto? make sure it is the same with log.

2.if you cant confirm the mode of the router, you can use command to set the mode of log to be auto ,then in loopback on wdm side to check if the router will be up.

#set working mode:
:cfg-set-ethworkmode:2-1,lp1,1,auto

:cfg-set-ethworkmode:3-2,lp1,1,auto

 #query working mode:
:cfg-get-ethworkmode:2-1,lp1,1

:cfg-get-ethworkmode:3-2,lp1,1


END