No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ- How to identify class-type(B+ or C+) of different SFP module according to vendor PN

Publication Date:  2012-07-25 Views:  73 Downloads:  0
Issue Description
Q:
How to identify the class-type of the SFP module in the OLT PON port remotely? 



Alarm Information

Null.






Handling Process

A:
In OLT R8 and later version can support to query the SFP module's class-type, but only for the module which was produced after Oct, 2010. The old SFP modules' class-type in OLT R8 will show null value. It may cause an accident if replacing a wrong class-type SFP module.

(1) In OLT CLI, type the following command, and check the Vender PN.
MA5600T(config-if-gpon-0/1)#display port state 0
----------------------------------------------------------------------------
Vendor Rev Unspecified
Vender PN SPS4348HHPCDE
Vender SN A532007132
Manufactured 10-04-06
Vender name SOURCEPHOTONICS
Vendor OUI 0006b5
Vendor specific 53 50 53 2d 34 33 2d 34 38 48 2d 48 50 2d 43 44
45 20 20 20 20 20 20 20 20 20 00 00 00 00 00 00
----------------------------------------------------------------------------

(2) Check the table and find out the calss-type according to the vendor PN.
Vendor Name------Vendor PN------Class-Type
NeoPhotonics------PTB38J0-6538E-SC/PC-KE------Type-B+
Hisense------LTE3680M-BC+------Type-B+
Sourcephotonics------SPS-43-48H-HP-CDE------Type-B+
SUPERXON------SOGP4321-PSGA------Type-B
Finisar------FTGL2026P2CUN-HW------Type-B+
Photop------PHHW6386-POLT-SI-B------Type-B+
WTD------RTXM167-522------Type-B+
NeoPhotonics------PTB38J0-6538E-SC/PC-KCR------Type-C+
Sourcephotonics------SPS-43-48H-CP-CDF-HW------Type-C+
 




Root Cause
Null.


Suggestions
Null.


END