No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

N2000BMS shows the alarms with an early hour becasue the NE does not have configured the rigth timezone

Publication Date:  2012-07-25 Views:  49 Downloads:  0
Issue Description
The alarms displayed in the N2000BMS are displayed with an early hour.
The alarm is reported in the OLT  MA5600V800R007

example:

the next alarm is reported in the OLT at 01:39:49-05:00, but, in the N2000BMS appear the same alarm at 02:39:49. The time in the N2000BMS is the real time.




Alarm Information
NULL
Handling Process
Becasue of the BMS had the correct time, so, it was supposed that the DST was not configured in the NEs.

it was analized the time settings and the tme zone  in the OLT.

Ceylan(config)#display time                                                    
{ <cr>|dst<K>|time-stamp<K> }:                                                 

  Command:                                                                     
          display time                                                         
  2011-11-02 10:10:03-05:00                                                                                                                                   


Ceylan(config)#display timezone                                                
The current time zone:  GMT-05:00


it was found that the timezone is not the correct. so it was requested change the timezone to make a test.

Ceylan#timezone
{ GMT<E><GMT+,GMT-> }:GMT-                                                      
{ time<hh:mm><S><Length 3-5> }:6:00  


after modify the time zone to the correct one, the alarms was reported in the N2000BMS with the correct time.
however, to avoid changing the timezone every period of time, it was suggested to enable the DST.


Ceylan(config)#display time dst                                                
  Failure: DST has not been configured  

 


Root Cause
none
Suggestions
verify the timezone of the country to set the correct one in the NE or in the Server.
also, consider use the DST feature.

END