No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to modify timeout value of TL1 command on BMS V200R011 version

Publication Date:  2012-07-25 Views:  35 Downloads:  0
Issue Description
Q:
How to modify timeout value of TL1 command on BMS V200R011 version?
Alarm Information
Null
Handling Process
A:
To change the TL1 commands due to an unsuitable timeout value, we can use following commands on SYBASE to modify TL1 timeout value:
TL1 Command indicates the TL1 command you want to modify, and Time indicates the timeout value.
 
use table
go
insert into bms_tl1_TimeOut (CmdName,TimeOut) values ('TL1 command',time)
go 
 
For example, the following TL1 commands were presenting timeout between customer`s OSS and BMS N2000 server.
 
- LST-DSLPORTDETAILINFO
- LST-ADSLPORTPERF
- DACT-ADSLPORT
- MOD-SERVICEPORT
 
All of them were set to 60 seconds and we needed to change it to 120 seconds, so the following commands had been applied:
 
use BMSDB
go
insert into bms_tl1_TimeOut (CmdName,TimeOut) values ('LST-DSLPORTDETAILINFO',120)
insert into bms_tl1_TimeOut (CmdName,TimeOut) values ('LST-ADSLPORTPERF',120)
insert into bms_tl1_TimeOut (CmdName,TimeOut) values ('DACT-ADSLPORT',120)
insert into bms_tl1_TimeOut (CmdName,TimeOut) values ('MOD-SERVICEPORT',120)
go 
Root Cause
Null
Suggestions
Null

END