No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HDP5510 Fails to Reboot

Publication Date:  2012-07-18 Views:  61 Downloads:  0
Issue Description
If some kinds of disk fault occurs in HDP5510 system, the LSI raid card can not assign SAS address to the disk and fails to initialize during boot phase
Alarm Information
None
Handling Process
1)      LSI raid card illuminate the light of the disk when fails to assign SAS address, you can check the light in the front panel

 
2)      Remove the disk which the alarm light is red
3)      Reboot the system to normal status, and the system can rebuild the raid group with hot-spare disk
Root Cause
The error indicates that there is a disk fault in the system, LSI raid card can not assign SAS address, stop initializing, you must remove the faulty disk and restart the system
Suggestions
The case shows how to deal with the self-check failure of LSI Raid card

END