No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

An Earlier Version of RAID Card Firmware Causes that the Buzzer not the Indicator Generates an Alarm for Disk Failures

Publication Date:  2012-07-19 Views:  88 Downloads:  0
Issue Description
The buzzer generates sound but the alarm indicator does not blink. This problem may be caused by a hardware failure.
Alarm Information
None
Handling Process
Replace the faulty disk.
Root Cause
The log indicates that a RAID card is degraded. Run the Areca RAID card CLI tool to collect the disk information, and a member disk is in the failed state and the RAID group is in the Degraded state. The earlier version of RAID card firmware causes that the indicator does not generate an alarm for disk failures.
Suggestions
None

END