Questo sito utilizza cookie di profilazione (propri e di terze parti) per ottimizzare la tua esperienza online e per inviarti pubblicità in linea con le tue preferenze. Continuando a utilizzare questo sito senza modificare le tue preferenze acconsenti all’uso dei cookie. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie clicca qui>
The website that you are visiting also provides Arabian language. Do you wish to switch language version?
يوفر موقع الويب الذي تزوره المحتوى باللغة العربية أيضًا. هل ترغب في تبديل إصدار اللغة؟
The website that you are visiting also provides Russia language Do you wish to switch language version?
Данный сайт есть в английской версии. Желаете ли Вы перейти на английскую версию?
The storage device was properly connected to the host through a direct connection redundant network. A LUN was mapped to the host and was owned by controller A. The host performed I/O operations on the LUN. During the operations, the optical fiber for controller A was removed, and the I/O path switched over to controller B. After the optical fiber was reinserted, the I/O path did not fail back to controller A.HBA: QLogic HBA
1.Remove and reinsert the optical fiber again. Then run the hot_add command on the host to scan for LUNs, and the upTools –S command to check whether any new paths are generated.
2.Check whether the optical fiber is damaged. If no, remove the optical fiber and insert it to another port, or add another fiber connection. If yes, replace the optical fiber. Run the hot_add command on the host to scan for LUNs, and the upTools –S command to check whether any new paths are generated.
3.It is recommended that the services be migrated to another host and the current host be restarted. After the system has recovered, migrate the services back.