Questo sito utilizza cookie di profilazione (propri e di terze parti) per ottimizzare la tua esperienza online e per inviarti pubblicità in linea con le tue preferenze. Continuando a utilizzare questo sito senza modificare le tue preferenze acconsenti all’uso dei cookie. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie clicca qui>
The website that you are visiting also provides Arabian language. Do you wish to switch language version?
يوفر موقع الويب الذي تزوره المحتوى باللغة العربية أيضًا. هل ترغب في تبديل إصدار اللغة؟
The website that you are visiting also provides Russia language Do you wish to switch language version?
Данный сайт есть в английской версии. Желаете ли Вы перейти на английскую версию?
Windows Failover Cluster was successfully configured, and the cluster environment was shown in Figure1.
Figure 1 Enabling the WMI service
We used a LUN mapped from the storage device to configure two file services under node 1 and node 2. We created file folders on node 1 and node 2 and shared them for external access. We used a 15 GB LUN that was owned by controller A and was mapped to node 1 to create logical partitions and formatted it as an NTFS file system. We used a 15 GB LUN that was owned by controller B and was mapped to node 2 to create logical partitions and formatted it as an NTFS file system.
We copied large files from a local Windows 7 PC to the shared file folders on node 1 and node 2. The copy progress halted after a few minutes. We checked on the storage device and found out that there was no I/O.
The problem is related to the S5000T storage device and the UltraPath. We ran a series of comparison tests:
Due to the complexities of the environment on the original Windows 7 PC, no direct cause was found.
Conclusion: This problem was caused by the specific Window 7 client, and had nothing to do with the UltraPath, cluster, or storage device environment.